Silicone Self-Sealing Tape

Silicone Self-Sealing Tape

Originally developed for the military, this silicone-based

repair tape is a tool box essential. It's self-fusing, and

requires no adhesive because it only bonds to itself. The

tape stretches to 3 times its length, conforms to irregular

shapes easily and withstands UV rays, acids and fuels. It

will not melt, even at 500° F and remains flexible to -60°F.

It insulates to 8K volts – ideal for short term electrical

repairs. Forms a permanent air and watertight seal – fix

that leaky pipe, radiator hose or air duct. Once wrapped

over itself, it forms a bond immediately, and is permanently

fused in 24 hours. It is ideal for automotive, marine and

home use. Made in USA.

This self-vulcanizing tape is designed to wrap around

ignition wire, boots, and connectors. It can also seal out

moisture, while protecting wires from the harmful effects

of excessive heat. The specially formulated silicone rubber

vulcanizes automatically, providing adhesion when the tape

surfaces make contact. At 1 in. wide and 10 ft. long, self-

vulcanizing tape is an excellent alternative to applying heat

shrink sleeves and insulated wire sleeving to spark plug

wires.

Made of silicone rubber, self vulcanizing tape rolls will

protect electrical connections, hoses, and spark plug

boots from extremely high temperatures.

SILICONE TAPE FEATURES

• No adhesive residue upon removal
  

• Available in a wide variety of colors
  

• Seamless self-fusing silicone tape
  

• Cures completely within 24 hours
  

• Salt water resistant
  

• An excellent insulator with high dielectric strength
  

• Resists fuels, oils, acids, solvents, road salt and UV rays
  

• Creates a permanent air-tight, water-tight seal in seconds
  

• Alternative to heat shrink tubing
  

• Self fusing and begins curing immediately
  

• Forms permanent moisture tight seal
  

• Ideal for high temperature applications
  

SILICONE TAPE SPECIFICATIONS

• Dielectric Strength: 400 volts per mil (vpm)
  

• Operating Temperature: -60F to 500F (-51.11C to 260C)
  

• MIL-SPEC: Meets A-A-59163
  

• Tensile Strength: 700 psi (Kg/cm 49.226)
  

• Elongation: 300%
  

Installation Instructions for Self Vulcanizing Fusing Tape

Installation Instructions:

• Clean surface that the tape will be applied to
  

• Make two wraps where the tape begins. Spiral the tape with a slight pull to ensure a tight bond
  

• When the area is covered, make two wraps at the end to seal the tape
  

Part Numbers:

21401”x36’Black21411”x36’Red

21422”x36’Black21461”x10’Red

21451”x10’ Black

21471”x10’Clear