Ignition Accessories
Plug Wire Silicone Over-Sleeve
Installed on the wire prior to the boots.  The over-sleeves
increases the thermal protection of the wire and increases
dielectric strength to prevent cross-fire and arcing.  The
Silicone over-sleeve comes in 25’ lengths.  The Sleeve comes
in blue, black, red, yellow, neon red, and neon green (not shown).

Shrink Sleeve & Number Sleeve
Installed on the wire after the Silicone Over-Sleeve to complete
the wire and eliminate another path for spark leakage.  The
Sleeves are available plain or printed in white or gold.  They can
be printed with lettering or simple logos.  The shrink sleeves
come in bulk or packaged 18 to a pack.  Packaged shrink
sleeves also include cylinder numbers.

Spark Plug Boots
These boots are designed to shield the spark plug wire and boot
from damage due to the extreme heat radiating from the exhaust. 
They will also protect the wires (for a short period of time) if they
come loose from the harness and lay onto the exhaust components.
These two layers of fiberglass will insulate the protected wires
from heat up to 1200º F .

Wire Coordinators
Holds two wires to allow the routing away from the headers and
other obstructions.  The wire coordinators come in two sizes 8
and 10 mm to work with sleeved and non-sleeved wire.  The wire
coordinators are packaged four to a pack or in bulk.


Part Numbers:
Silicone Over-Sleeve:  Fits up to 9mm wireShrink Sleeve:  2” length with/without logo 
Spark Plug Boots:  6 colors available Wire Coordinators:  Sizes 8mm and 10mm